Tandem Welding

Tandem welding is a more recent breed of welding technologies which fit with a consistent drive to improve quality, efficiencies and cost in the process.
The main advantages of using Tandem welding are that it is highly efficient, requires minimum heat input, provides superior quality results to name but a few.

The welding process is one of the most important techniques for production of electronic components, small products, and heavy structures through all industry sectors. The process and application of welding techniques is completely wide spread, from all types of industry, through job shop outfits to highly-automated computer-controlled factories.

Therefore, the welding process has progressed remarkably in the past 30 years as a result of technological innovation aimed at increasing productivity, stabilization of weld quality and labor saving. Recently, automatization and robotization are beginning to be adopted as key technologies to secure improved productivity and consistent quality. Some novel welding processes such as twins, tandem and laser-MIG hybrid welding are developed for a higher productivity.

One of the advanced welding processes which is called the Tandem welding process involves two independent electrodes (early electrode and delayed electrode) which are arranged parallel to weld line and works by controlling them individually under separate welding conditions (current and voltage) while keeping the distance between the early and delayed electrodes at a constant (Figure 1).

 

fig477_1

Figure 1: Tandem Welding Condition and Electrode Distance

The major advantages of the Tandem Weld process are extremely high efficiency, minimum heat input, excellent weld seam quality and extraordinarily high deposition rate.

Applications

Automated welding
Thin to thick materials

Advantages

Extremely high weld speed
Very high deposition rates
Excellent weld quality, minimum risk of pore formation
Low heat input
Optimum arc control

Material

Steel
High-strength steel
Aluminium
Chrome-nickel materials
Coated plate

fig477_2

Figure 2: Initial Tandem Torch and Welding Motion

fig477_3

Figure 3: Quality of Tandem Welding


References

1. J.P. Lee, M.H. Park , D.H. Kim , B.J. Jin, J.Y. Shim, B.Y. Kang, I.S. Kim: An experimental study on optimizing for tandem gas metal arc welding process, Journal of Achievements in Materials and Manufacturing Engineering, Vol.68, Issues 2, February 2015, p.72-79;

2. H.Mori, T.Asada: Flexible tandem welding system, KOMATSU Technical Report, Vol.50, No 154, 2004, p.1-5;

3. CLOOS, Welding, CLOOS12/10, Subject to technical alterations, Carl Cloos Schweisstechnik GmbH, Accessed 05-2016.

 

Share this Article

One thought on “Tandem Welding

Leave a Reply

Your email address will not be published. Required fields are marked *